Filter
Top Products
5
99-7861
KIT ASSEMBLY
Align the holes in the ISO brackets
with the holes in the radio. Mount
the brackets to the radio using
screws supplied with the radio.
(Figure A)
1
Slide the radio/bracket assembly into
the assembled radio housing until it
snaps into place.
(Figure B)
2
Snap the ISO trimplate onto the front
of the assembled radio and housing.
(Figure B)
3
ISO HEAD UNIT PROVISION WITH POCKET
A
B
NOTE: To remove the radio unsnap
and remove the ISO trimplate. Using
a flat blade screwdriver disengage
ISO brackets from the radio housing
and slide radio out of radio housing.