Filter
Top Products
4
99-7604 KIT PREPARATION
B
C
A
KIT PREPARATION
Attach the vents into the radio housing
in the same location as the factory
panel.
(Figure A)
1
Secure the factory pocket removed in
step 16 of the dash disassembly into
the radio housing using the factory
hardware.
(Figure B)
2
Continue to kit assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
Attach the top radio housing bracket to
the radio housing using the (2) #8 X
3/8” Phillips screws provided with this
kit.
(Figure C)
3
Clip the thin plastic trim removed in
step18 (of page 3) to the top edge of
the radio housing.
4
Connect the black end of the climate
control cable to the climate controls in
the radio housing and connect the
other end of the cable to the factory
climate control harness during final
assembly.
5