Filter
Top Products
Kit Assembly 99-7509
7
ISO mount radio provision with pocket
(Figure A)
(Figure B)
(Figure C)
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Mount the ISO brackets to the
aftermarket radio using the screws
supplied with the radio. (Figure A)
3. Slide the radio into the radio housing
until it snaps into place. (Figure B)
4. Snap the trim plate onto the front of the
radio housing. (Figure C)
5. Snap the pocket into the Radio.
Countinue to next page