Filter
Top Products
Manual Climate Control
99-7503
KIT ASSEMBLY
2003-2004 MAZDA 6
7
A
ASSEMBLED
B
INSTALLED
C
D
E
Put the climate control knob outer
trim panel and the backlight disper-
sion bar together and clip into the
radio housing panel as one unit.
Note: You may have to push down
slightly on the middle of the unit to
ease in positioning it into the kit.
(Figure A, B, C )
1
2
3
Secure the unit with the factory
hardware removed in step 10 of the
manual climate control dash disas-
sembly.
4
Unclip and remove the small oval
cover plate at the bottom center of
the factory radio and insert into the
99-7503 radio housing.
(Figure E)
Secure the light bulb boards on each
side of the backlight dispersion bar
using the factory hardware removed
in step 9 in manual climate control
dash disassembly.
(Figure D )
Note: The 16 position to
16 position harness sup-
plied with the 99-7503
WILL be used in vehicles
with manual climate
controls.
(Figure F)
F