Filter
Top Products
13
99-6507
kit assEMBlY
iso raDio Provision witH PockEt
1
Mount the ISO Brackets to the
radio using the screws supplied
with the radio.
Figure A
2
Slide the radio into the opening
until it snaps into place.
Figure B
3
Using the alignment pins on the
trim plates & the corresponding
holes in the housing, attach the
upper trim plate and the lower trim
plate supplied with the kit.
Figure B
A
B
NOTE:
You will need to remove the
aftermarket radio’s trim ring if
equipped.
4
Continue to Final Assembly.