Filter
Top Products
99-5721 KIT ASSEMBLY
Dual Zone Temperature Controls
(allows 99-5721 to operate in a dual-zone climate controlled car)
1. Press the Temp Down and Passenger Heated Seat button simultaneously to
enter Dual Zone Set Mode. Note: The ZONE icon will light to indicate that
you are in dual zone mode, and the temperature bar graph will ash.
2. Press the Temp Up and Temp Down buttons to set the passenger
temperature set point.
3. Press no buttons for 5 seconds and the temperature bar graph will stop
ashing and the Temp Up and Temp Down buttons will adjust the drivers
temperature set point. Note: The Zone icon will stay on indicating that dual
zone mode is still active.
4. Press the Temp Down and the Passenger Heated Seat button simultaneously
while the Temperature Bar Graph is ashing to exit dual zone mode. Note:
The driver temperature set point will now be used for both sides.
5. Note: When adjusting either set point the ambient temperature display will
show the actual set point then revert back to ambient after 2-3 seconds.
6. Press the Fan Down and the Driver Heated Seat buttons simultaneously to
put the system into Auto Mode. Note: This will be indicated by the Fan Bar
Graph showing the middle segment line only.
7. To exit Auto Mode you can either adjust the Fan Seed or the Mode (face,
face-foot, defrost, etc.).