Filter
Top Products
50
95-2009 KIT ASSEMBLY
DOUBLE DIN RADIO PROVISION
STACKED ISO MOUNT UNIT(S) PROVISION
Snap the Double DIN brackets to the
edge of the Double DIN trim plate.
(Figure A)
1
Slide the Double DIN head unit or
stacked ISO head units into the brack-
et/radio housing assembly and secure
the Double DIN head unit or stacked
ISO head units to the assembly using
the screws supplied with the radio.
(Figure B)
2
Note: For the Buick Le Sabre,
Oldsmobile Aurora and the Pontiac
Bonneville the (3) speed clips and
screws provided with the kit will need
to be installed into the sub dash where
the screw holes line up on the kit.
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
A
B