Filter
Top Products
2
ALL VEHICLES
Chevrolet
-
Blazer 1973-1987, Pickup 1973-1987
GMC - Pickup 1973-1987, Suburban 1973-1987
1
Fig. A
Fig. B
Fig. C
Fig. D
Fig. E
DIN HEAD UNITS: Mount the Radio Housing to the sub-dash with (3) Phillips screws
previously removed in step #1. (see Fig. A). Scribe the DIN radio opening onto the
sub-dash metal, remove the Housing and cut the sub-dash along the scribed line.
(see Fig. B). Place the Housing between the dash trim bezel and sub-dash and
secure with the same (3) Phillips screws. (see Fig. C). Cut and remove the shaft
supports from the Faceplate. Place the Faceplate against the face of the radio trim
bezel and slide it to the right until the right edge of the Faceplate meets the lip of
the bezel. (see Fig. D). Slide the DIN cage through the radio opening and secure by
bending the metal locking tabs down. Slide the aftermarket head unit into the cage
(see Fig. E) until secure.
87-99-3052
KIT ASSEMBLY/FINAL ASSEMBLY