Mercury 2005 Offroad Vehicle User Manual


 
Mountaineer is so accommodating that its available heated seats allow
both driver and front passenger to add warmth to their travels.
To operate the heated seats:
Activate by pushing the control on the side of the seat, on the
outboard portion of the plastic side shield. The heated seat icon in
the Dual Automatic Temperature Control (DATC) (if equipped) will
illuminate when activated.
To deactivate, push the control again.
HEATED SEATS (IF EQUIPPED)
DUAL AUTOMATIC TEMPERATURE CONTROL (DATC) (IF EQUIPPED)
1. ON/OFF — With the ignition in the ON position, press AUTO, any of the override controls, the
fan speed control, or either of the temperature selection controls to turn the system on.
Press OFF to turn the system off. If the outside temperature function has been selected, it
will continue to operate until the ignition is turned off.
2. AUTO — To initiate automatic operation, press AUTO and select the desired temperature.
When AUTO is selected, the air conditioning system automatically makes climate control
adjustments based on existing conditions.
3. DUAL — As the driver, you can press DUAL to enable or disable the dual zone temperature
feature. Your passenger may also initiate the dual temperature zone feature by pressing the
passenger side temperature control. When DUAL is selected, the indicator will illuminate.
The display window will indicate the current driver-selected temperature setting and the last
passenger-selected temperature setting.
4. TEMPERATURE CONTROL — To control the temperature on the driver’s side, select any
temperature between 60°F and 90°F by pressing the temperature control. The display
window indicates the selected temperature and allows for manual control of fan speed if
automatic fan speed is not desired. Have your passenger press the passenger side
temperature control to select any temperature between 60°F and 90°F.
1
2
3
44
If your Mountaineer came
equipped with another climate
control system, please see your
Owner’s Guide.