Filter
Top Products
system; a 24-volt power supply
will cause vehicle damage
• park the vehicles close to each
other, but do not allow the two
vehicles to touch.
• check to make sure neither
battery is disconnected
• remove any excessive corrosion
from the battery terminals
• turn on the heater fan in each
vehicle to prevent damage from
voltage surges
To jump start the vehicle:
1. Connect the jumper cables in
numerical order.
⅜
1 Disabled battery positive
terminal
⅜
2 Booster battery positive
terminal
⅜
3 Booster battery negative
terminal
⅜
4 Disabled vehicle engine
Do not connect the end of
the second cable to the
negative (-) terminal of the
battery to be jumped. A spark
may cause an explosion of the
gases that surround the battery.
2. Start the engine in the vehicle
with the booster battery.
3. Wait a few minutes and start the
engine in the vehicle with the
disabled battery.
+–
4
2
3
1
+–
ON
II
ACC
I
LOCK
0
START
III
Roadside emergencies
121