Filter
Top Products
140
Controls in detail
Control system
Instrument cluster submenu
Access the
Inst. cluster
menu via the
Settings
menu. Use the
Inst. cluster
submenu to change the instrument cluster
display settings. The following functions
are available:
Selecting time display mode
̈ Move the selection marker with the
æ or ç button to the
Inst.
cluster
submenu.
̈ Press button j or k repeatedly
until you see this message in the left
display:
Clock
.
The selection marker is on the current
setting.
̈ Press æ or ç to set the
12-hour
or
24-hour
time display mode.
Selecting temperature display mode
̈ Move the selection marker with button
æ or ç to the
Inst. cluster
submenu.
̈ Press button j or k repeatedly
until you see this message in the left
display:
Temp. indicator
.
The selection marker is on the current
setting.
̈ Press æ or ç to set temperature
unit to degrees Celsius (
°C
) or degrees
Fahrenheit (
°F
).
Function Page
Select time display mode 140
Select temperature display
mode
140
Select speedometer display
mode
141
Select language 141
i
For information on setting the time, re-
fer to the separate COMAND operating
instructions.