![](http://pdfasset.owneriq.net/2/c0/2c0578fc-35f7-416b-a199-82b6fce9314e/2c0578fc-35f7-416b-a199-82b6fce9314e-bg6d.png)
107
Controls in detail
Seats
Removing and installing front seat
head restraints
For information on head restraint
adjustment, see “Seats” (
୴ page 35).
Front seat head restraints, manual seat
1 Release button
Removing front seat head restraints
̈ Pull head restraint to its highest
position.
̈ Push release button 1 and pull out
head restraint.
Installing front seat head restraints
̈ Insert head restraint and push it down
until it engages.
̈ Push release button 1 and adjust
head restraint to desired position.
i
Adjust the head restraint in such a way
that it is as close to the head as
possible.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the center of
the head restraint supports the back of the
head at eye level. This will reduce the poten-
tial for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
Do not interchange head restraints from
front and rear seat.
i
Tilt the backrest to the rear for easier
removal and installation of the head
restraints.