Filter
Top Products
When ATTENTION ASSIST (Y page 193) is
activated, the À symbol appears in the
multifunction display when the ignition is on.
Activating/deactivating Blind Spot
Assist
You can use the Blind Spot Asst. function
to activate or deactivate Blind Spot Assist
(Y page 194).
X
Press the = or ; button on the
steering wheel to select the DriveAssist
menu.
X
Press the 9 or : button to select
Blind Spot Asst..
X
Press a.
The current selection is displayed.
X
To activate/deactivate: press a
again.
Maintenance menu
In the Serv. menu, you can:
R
call up display messages (Y page 213)
R
restart the tire pressure loss warning
system (Canada only) (Y page 309)
R
check the tire pressure electronically (USA
only) (Y page 311)
R
call up the service due date (Y page 277)
Settings menu
Introduction
In the Settings menu, you have the following
options:
R
Changing the instrument cluster settings
R
Changing the lighting settings
R
Changing the vehicle settings
R
Changing the convenience settings
R
Restoring the factory settings
Instrument cluster
Selecting the unit of measurement for
distance
The Display Unit Speed-/Odometer:
function allows you to choose whether
certain displays appear in km/h or mph.
The selected unit of measurement for
distance applies to:
R
the digital speedometer in the Trip menu
R
the odometer and the trip odometer
R
the trip computer
R
the navigation instructions in the Navi
menu
R
DISTRONIC PLUS
X
Press the = or ; button on the
steering wheel to select the Settings
menu.
X
Press the : or 9 button to select the
Instr. Cluster submenu.
X
Press the a button to confirm.
208
Menus and submenus
On-board computer and displays
BA 207 USA, CA Edition B 2011; 1; 3, en-US
d2sboike Version: 3.0.3.6
2010-05-20T10:38:09+02:00 - Seite 208