Filter
Top Products
:
To adjust the thigh cushion
;
To adjust the backrest contour in the
lumbar region
=
To adjust the backrest contour in the
upper back region
?
To adjust the side bolsters of the seat
backrest
X
Make sure that the key is in position 2 in
the ignition lock.
Adjusting the four-way lumbar
support
You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.
:
To raise the backrest contour
;
To soften the backrest contour
=
To lower the backrest contour
?
To harden the backrest contour
Switching the seat heating on/off
Switching on/off
G
Warning!
Repeatedly setting the seat heating to level
3 may result in excessive seat temperatures.
The health of passengers that have limited
temperature sensitivity or a limited ability to
react to excessively high temperatures may
be affected or they may even suffer burn-like
injuries. Therefore, do not use seat heating
level 3 repeatedly.
The three red indicator lamps in the button
indicate the heating level you have selected.
i
If the battery voltage is too low, the seat
heating may switch off.
Driver's and front-passenger seat
The system automatically switches down
from level 3 to level 2 after approximately
eight minutes.
The system automatically switches down
from level 2 to level 1 after approximately ten
minutes.
The system automatically switches off
approximately 20 minutes after it is set to
level 1.
X
Make sure that the key is in position 2 in
the ignition lock.
X
To switch on: press button : repeatedly
until the desired heating level is set.
X
To switch off: press button : repeatedly
until all the indicator lamps go out.
Seats
111
Seats, steering wheel and mirrors
BA 207 USA, CA Edition B 2011; 1; 3, en-US
d2sboike Version: 3.0.3.6
2010-05-20T10:38:09+02:00 - Seite 111
Z