Filter
Top Products
X
Press on mount cover at its upper edge as
indicated by arrow.
The mount cover’s lower edge flips up.
X
Remove mount cover by pulling its lower
edge out of the side trim.
i
To avoid loss of the mount covers, insert
the mount covers into the mounts currently
not in use.
X
Make sure release button = faces up and
the handle : is to the rear before inserting
the cargo compartment cover blind.
X
Place left side of cargo compartment cover
blind in left mount.
X
Position right side of cargo compartment
cover blind over right mount.
X
Press release button = and guide cargo
compartment cover blind into mount.
X
Make sure cargo compartment cover blind
is securely fastened.
Cargo net
G
Warning!
Make sure the cargo net is properly engaged
at top and bottom position and the tightening
belts are securely fastened.
Never use a damaged cargo net.
Always use cargo net when transporting
cargo. This helps to avoid personal injury from
smaller objects being thrown around in the
occupant compartment during a collision or
sudden maneuver.
The cargo net cannot prevent the movement
of large, heavier objects into the passenger
compartment in an accident. Such items must
be properly secured using the cargo tie-down
rings in the cargo compartment floor.
Passenger use of seats behind installed cargo
net is restricted because of the footwell being
taken up by the net.
Use of the cargo net is a particularly
important safety factor when the vehicle is
loaded higher than the top of the seat
backrests with smaller objects. For your
safety, always use the cargo net when
transporting cargo.
The cargo net can be installed behind the
B-pillar or the C-pillar.
R
With the cargo volume fully expanded
(Y page 202), use holders : behind
B-pillars and the cargo tie-down rings in the
second-row footwell (Y page 201).
R
With the cargo volume expanded in part
(Y page 201), use holders ; behind
C-pillars and the cargo tie-down rings
behind the third-row seat backrests
(Y page 200).
X
Open the hook and loop fasteners on the
cargo net package.
X
Roll out the cargo net.
X
Unfold the cargo net.
X
Engage the upper cargo net bar.
The cargo net bar must engage audibly.
Installing the cargo net
Cargo net installed behind the C-pillar
206
Loading and storing
Controls in detail
X164_AKB; 5; 31, en-US
d2ureepe, Version: 2.11.8.1
2009-09-11T12:30:16+02:00 - Seite 206