Filter
Top Products
Mirrors
322
1
Button for folding exterior rear view
mirrors in and out
X
Folding in: Briefly press button 1.
Both exterior rear view mirrors fold in.
X
Folding out: Briefly press button 1.
Both exterior rear view mirrors fold out.
!
If an exterior rear view mirror housing is
forcibly pushed forward (hit from the rear),
reposition it manually by applying firm
pressure until it snaps back into place.
If an exterior rear view mirror housing is
forcibly pushed rearward (hit from the
front), press button 1 to fold mirrors in,
then press button 1 again to fold mirrors
out. Do not force mirrors by hand as this
may damage the adjustment mechanism.
The mirror housing is then properly
positioned and you can adjust the mirror in
the usual manner.
Activating exterior rear view mirror
parking position
Follow these steps to activate the mirror
parking position so that the passenger-side
exterior rear view mirror will be turned
downward to the stored position.
1
Driver’s side exterior rear view mirror
button
2
Passenger-side exterior rear view mirror
button
X
Make sure you have stored a parking
position for the passenger-side exterior
rear view mirror (Y page 324).
X
Make sure the Lower mirror when
reversing function in the Exterior
Mirror Convenience Settings
submenu of the COMAND system is
selected.
X
Switch on the ignition.
X
Press button 2 for the passenger-side
exterior rear view mirror.
i
With the automatic transmission in
reverse gear R, the previously selected
exterior rear view mirror is activated.
X
Shift the automatic transmission into
reverse gear R.
The passenger-side exterior rear view
mirror will be turned downward to the
stored position.
The exterior rear view mirror returns to its
previously stored driving position:
R
when you switch off the ignition
R
10 seconds after you have put the gear
selector lever out of reverse gear R
Controls in detail