![](http://pdfasset.owneriq.net/e/5e/e5ebc070-b629-4b0d-addb-c3444e35995d/e5ebc070-b629-4b0d-addb-c3444e35995d-bga1.png)
Control system
159
The following functions are available:
R
Selecting speedometer display mode
(Y page 159)
R
Selecting language (Y page 159)
R
Selecting display (digital speedometer or
outside temperature) for status indicator
(Y page 159)
Selecting speedometer display mode
X
Move the selection marker with button
æ or ç to the Instrument
Cluster submenu.
X
Press button j or k repeatedly until
the message Display Unit Digital
Speedometer appears in the multifunction
display.
The selection marker is on the current
setting.
X
Press button æ or ç to set
speedometer unit to Km or Miles.
Selecting language
X
Move the selection marker with button
æ or ç to the Instrument
Cluster submenu.
X
Press button j or k repeatedly until
the message Language appears in the
multifunction display.
The selection marker is on the current
setting.
X
Press button æ or ç to select the
language to be used for the multifunction
display messages.
Selecting display (digital speedometer or
outside temperature) for status indicator
X
Move the selection marker with button
æ or ç to the Instrument
Cluster submenu.
X
Press button j or k repeatedly until
the message Status Line Display
appears in the multifunction display.
The selection marker is on the current
setting.
X
Press button æ or ç to select the
desired setting.
The selected display is then shown
continuously in the status indicator (lower
display).
The other display now appears in the
Standard display menu (Y page 152).
Controls in detail
Z