Filter
Top Products
Control system
152
Selecting display (speed or outside
temperature) for status line
X
Move the selection marker with button
æ or ç to the Instr. Cluster
submenu.
X
Press button j or k repeatedly until
the message Status Line Display
appears in the multifunction display.
The selection marker is on the current
setting.
X
Press button æ or ç to select the
status line to Speed or Outside Temp..
You will see the status line display when
you have called up a different display from
the standard display.
Selecting display (speed or outside
temperature) for standard display
X
Move the selection marker with button
æ or ç to the Instr. Cluster
submenu.
X
Press button j or k repeatedly until
the message Basic Display appears in
the multifunction display.
The selection marker is on the current
setting.
X
Press button æ or ç to select the
display shown in the standard display.
The other display now appears in the
Standard display menu (Y page 143).
Time/Date submenu
Access the Time/Date submenu via the
Settings menu. Use the Time/Date
submenu to change the time and date display
settings.
The following functions are available:
R
Setting the time (Y page 152)
R
Setting the date (Y page 153)
Setting the time
This function is only available if your vehicle
is not equipped with navigation module.
X
Move the selection marker with button
æ or ç to the Time/Date submenu.
X
Press button j or k repeatedly until
the message Time - Hours Press R To
Confirm or Time - Minute(s) Press R
To Confirm appears in the multifunction
display.
The selection marker is on the current
setting.
Example illustration for setting the hour
X
Press button æ or ç to set the hours
or minute(s).
X
Press the reset button to confirm.
Controls in detail