Filter
Top Products
153
Controls in detail
Instrument cluster
Adjusting instrument cluster illumina-
tion
Use button 1 or 3 to adjust the illumina-
tion brightness for the instrument cluster.
To brighten illumination
̈ Press and hold button 3 until the
desired level of illumination is reached.
To dim illumination
̈ Press and hold button 1 until the
desired level of illumination is reached.
Resetting trip odometer
Make sure you are viewing the trip odome-
ter display (
୴ page 155).
̈ If it is not displayed, press button è
or ÿ on the multifunction steering
wheel (
୴ page 156) repeatedly until
the trip odometer appears in the multi-
function display.
̈ Press and hold reset button 2 in the
instrument cluster (
୴ page 152) until
the trip odometer is reset.
Tachometer
The red marking on the tachometer
(
୴ page 26) denotes excessive engine
speed.
To help protect the engine, the fuel supply
is interrupted if the engine is operated
within the red marking.
Outside temperature indicator
The outside temperature is displayed in the
multifunction display (
୴ page 155).
i
The instrument cluster illumination is
dimmed or brightened automatically to suit am-
bient light conditions.
The instrument cluster illumination will also be
adjusted automatically when you switch on the
vehicle’s exterior lamps.
i
With the exterior lighting switched on, the
brightness of the switches in the center console
will also be adjusted when using button
1 or 3.
!
Avoid driving at excessive engine speeds, as
it may result in serious engine damage that is not
covered by the Mercedes-Benz Limited
Warranty.
Warning! G
The outside temperature indicator is not de-
signed to serve as an ice-warning device and
is therefore unsuitable for that purpose.
Indicated temperatures just above the freez-
ing point do not guarantee that the road sur-
face is free of ice. The road may still be icy,
especially in wooded areas or on bridges.
164.boo Seite 153 Freitag, 30. März 2007 12:54 12