Filter
Top Products
208
Controls in detail
Audio system
Pause function
The CD changer mode is interrupted by an
incoming call on the telephone*
(
୴ page 212).
ț Switching on pause function
̈ Press U button.
The CD changer mode is
interrupted and
PAUSE
appears in
the display.
ț Switching off pause function
̈ Press U button.
The CD changer mode is active
again.
Track and time display
̈ Press
T
soft key.
The number of the track being played
and the elapsed playing time appear in
the display.
̈ Press
T
soft key again.
The total number of tracks and the total
playing time of the CD appear in the
display.
̈ Press
T
soft key.
The standard CD playback menu
appears in the display.
GSM network phones
Using your Mercedes-Benz specified
mobile telephone*, a number of functions
and operating steps can be performed and
displayed in the audio system display.
Further operating instructions not covered
here can be found in the operating instruc-
tions for the multifunction steering wheel
and the cellular telephone*.
If your audio system is set up for telephone
operation, the t symbol will appear in
the display.
When you insert your Mercedes-Benz
specified mobile telephone* into the
telephone cradle, you will be prompted to
enter your PIN for 30 seconds
(
୴ page 209). This display disappears
when you press any button.
When your mobile telephone is inserted
into the telephone cradle, you will see the
reception strength in the upper right-hand
corner of the display.