Filter
Top Products
100
Controls in detail
Seats
Front seat head restraints, power seat*
1 Head restraint switch
̈ Switch on ignition (୴ page 33).
Removing front seat head restraints
̈ Press switch 1 upwards and hold until
head restraint is fully extended.
̈ Pull out head restraint.
Installing front seat head restraints
̈ Press switch 1 upwards and hold for
about five seconds.
̈ Push head restraint down until it
engages.
̈ Adjust head restraint to desired
position (
୴ page 38).
Rear seat head restraints
Head restraint height (rear outer seats)
1 Release button
Raising:
̈ Manually adjust the height of the head
restraint by pulling it upward.
If the head restraint is fully retracted,
push release button 1 and pull the
head restraint out.
Lowering:
̈ To lower the head restraint, push
release button 1 and push down on
the head restraint.
Warning! G
For safety reasons, always drive with the
rear head restraints in the upright position
when the rear seats are occupied.
Keep the area around head restraints clear
of articles (e.g. clothing) to not obstruct the
folding operation of the head restraints.