Filter
Top Products
271
Operation
Tires and wheels
Activating the tire inflation pressure
monitor
You must activate the tire inflation pres-
sure monitor in the following cases:
ț If you have changed the tire pressure
ț If you have replaced the wheels or tires
ț If you have installed new wheels or
tires
̈ Be sure that the tire pressure is cor-
rectly set.
̈ Press the ÿ button on the steering
wheel repeatedly until the standard dis-
play menu appears (
୴ page 126).
̈ Press the k button until the infla-
tion pressure of each tire appears in
the multifunction display.
̈ Press the reset knob (୴ page 22).
The following message will appear in
the multifunction display:
Check current tire pressure?
.
̈ Press the æ button for
Yes
.
The following message will appear in
the multifunction display:
Tire pressure
monitor activated
Press. display after
driving a few mins.
Warning! G
The tire inflation pressure monitor does not
indicate a warning for wrongly selected in-
flation pressures. Always adjust tire inflation
pressure according to the label affixed on
the fuel filler cap.
The tire inflation pressure monitor is not
able to issue a warning due to a sudden loss
of pressure (e.g. tire puncture caused by a
foreign object). In this case bring the vehicle
to a halt by carefully applying the brakes and
avoiding abrupt steering maneuvers.
i
Operating radio transmission equip-
ment (e.g. wireless headsets, two-way
radios) in or near the vehicle could
cause the tire inflation pressure moni-
tor to malfunction.
i
If transporting a deflated road wheel or
additional wheel sensors in the vehicle,
the tire inflation pressure monitor
should not be reactivated until the de-
flated wheel or additional wheel sen-
sors have been removed from the
vehicle. Otherwise, the deflated wheel
or additional sensors could confuse the
tire inflation pressure monitor system
and cause it to malfunction.