![](http://pdfasset.owneriq.net/c/1e/c1e3979c-7e95-40d8-ac25-161a5618c477/c1e3979c-7e95-40d8-ac25-161a5618c477-bg86.png)
134
Controls in detail
Control system
After entering the vehicle, the steering
wheel and seat will move into the position
stored in memory when
ț the driver’s door is closed
ț you put the key in the starter switch
ț press the appropriate stored position
button on the memory switch
(
୴ page 102).
̈ Move the selection marker with
the
æ or ç button to
the
Convenience
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Function Easy-entry feature
.
The selection marker is on the current
setting.
̈ Press æ or ç to change the
easy-entry/exit setting.
Warning! G
You must make sure that no one can be-
come trapped or injured by the moving
steering wheel and the driver’s seat when
the easy-entry/exit feature is in operation
and the driver’s door is being opened or the
key is removed from the starter switch. Do
not leave children unattended in the vehicle,
or with access to an unlocked vehicle. Unsu-
pervised use of vehicle equipment may
cause an accident and/or serious personal
injury.
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
i
To cancel seat/steering wheel move-
ment, do one of the following:
ț Press seat adjustment switch
(
୴ page 35)
ț Move the steering column stalk
(
୴ page 37)
ț Press the memory switch
(
୴ page 102)