Filter
Top Products
40Seats
Technical
data
Instruments
and controls
Operation Driving
Instrument
cluster display
Practical hints Car care Index
Manual seats (ML 320)
We recommend to adjust the manual seat in the
following order:
1 Seat, fore/aft
Lift handle (1), slide seat to desired position and
allow handle to reengage. Check for proper
engagement before driving. The position should be
as far rearward as possible, consistent with ability to
properly operate controls.
2 Seat cushion tilt
Raise lever (2), move seat cushion to desired
position. Release lever.
3 Backrest tilt
Turn handwheel (3) until your arms are slightly
angled when holding the steering wheel.
4 Head restraint height
Raising:
Pull up on head restraint.
Lowering:
Push button (4), located at top of seat back, and
push down on head restraint.
Adjust head restraint to support the back of the head
approximately at ear level. The head restraint angle
can also be adjusted manually.
See page 45 for removing head restraints.