![](http://pdfasset.owneriq.net/0/cd/0cd47c00-a2c0-4cca-ac08-7ea20e2a5496/0cd47c00-a2c0-4cca-ac08-7ea20e2a5496-bg16d.png)
362Exterior lamps
Technical
data
Instruments
and controls
Operation Driving
Instrument
cluster display
Practical hints Car care Index
Bulbs for high beam
H7 (55 W)
Open hood.
Press the clip together (arrow) and remove headlamp
cover (1).
Pull electrical connector off.
Unclip the retainer spring and take out the bulb.
Insert the new bulb so that the base locates in the
recess on the holder.
Clip in retainer springs and plug the connector onto the
bulb.
Align headlamp cover (1) and click into place.
Xenon
Bulb for low/high beam
Warning!
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the lamp
and its components. We recommend that you have
such work done by a qualified technician.
J_OM_215.book Seite 362 Mittwoch, 30. Mai 2001 2:01 14