Filter
Top Products
129Multifunction steering wheel, multifunction display
Technical
data
Instruments
and controls
Operation Driving
Instrument
cluster display
Practical hints Car care Index
1 Preliminary display of the individual settings
2 “SETTINGS” – in this options menu you can call up
the individual setting menu “LIGHTING”.
Pressing button æ or ç on the multifunction
steering wheel controls the selection marker.
3 “LIGHT CIRCUIT HEADLAMP MODE”
1, 2
,
seepage144.
4 “LOCATOR LIGHTING”, see page 147.
5 “HEADLAMPS DELAYED SWITCH-OFF”, see “Night
security illumination” on page 146.
6 “INT. ILLUMINATION DELAYED SWITCH-OFF”, see
“Interior lighting” on page 203.
7 Returning the individual setting menu “LIGHTING”
to the factory setting.
8 Acknowledgment.
1Except Canada
2 For safety reasons, setting only possible while vehicle is standing
still.
Press the è or ÿ button repeatedly until the
individual setting preliminary display (1) appears.
Press the j or k button until the setting menu
“SETTINGS” (2) is displayed.
Press button æ or ç until the individual setting
menu “LIGHTING” is selected by the selection marker.
Press the j or k button until the required
display (3 to 6) is displayed. Pressing the æ or ç
button controls the selection marker. The settings made
are stored and applied immediately.
The individual setting preliminary display (1) will
appear again after you have run through all the setting
menus. Pressing the è or ÿ button displays the
next or previous system.
OM_203.book Seite 129 Donnerstag, 31. Mai 2001 11:57 11