Mercedes-Benz 2002 C 240 Automobile User Manual


 
123Multifunction steering wheel, multifunction display
Technical
data
Instruments
and controls
Operation Driving
Instrument
cluster display
Practical hints Car care Index
To return menu “SETTINGS” (2) to its factory
setting:
Call up the individual setting preliminary
display (1) or display (2).
Press the reset knob on the instrument cluster
(see page 98) for approximately 3 seconds.
Display (3) will appear.
Press the reset knob on the instrument cluster once
more. The menu “SETTINGS” is reset to factory
settings, acknowledged by display (4).
The individual setting preliminary display (1) will
appear if you do not press the reset knob on the
instrument cluster within about 5 seconds. The
setting menus will not be reset.
Note:
For safety reasons, the individual setting “LIGHT
CIRCUIT HEADLAMP MODE” in menu “LIGHTING”
cannot be reset while driving, see page 130. If an
attempt is made, the message “LIGHTING” – “CANNOT
BE COMPLETELY RESET TO FACTORY SETTINGS
WHILE DRIVING” will be displayed.
OM_203.book Seite 123 Donnerstag, 31. Mai 2001 11:57 11