Filter
Top Products
118Multifunction steering wheel, multifunction display
Technical
data
Instruments
and controls
Operation Driving
Instrument
cluster display
Practical hints Car care Index
1 Preliminary display of the individual settings
2 “SETTINGS” – in this options menu you can call up
the menu “LIGHTING”.
Pressing button æ or ç on the multifunction
steering wheel controls the selection marker.
3 “LIGHT CIRCUIT HEADLAMP MODE”
1
,
seepage131.
4 “LOCATOR LIGHTING”, see page 133.
5 “HEADLAMPS DELAYED SWITCH-OFF”, see “Night
security illumination” on page 132.
6 “INT. ILLUMINATION DELAYED SWITCH-OFF”, see
“Interior lighting” on page 189.
7 Returning the setting menu “LIGHTING” to the
factory setting.
8 Acknowledgment.
1Except Canada
Press the è or ÿ button repeatedly until the
individual setting preliminary display (1) appears.
Press the j or k button until the setting menu
“SETTINGS” (2) is displayed.
Press button æ or ç until the menu “LIGHTING”
is selected by the selection marker.
Press the j or k button until the required
display (3 to 6) is displayed. Pressing the æ or ç
button controls the selection marker. The settings made
are stored and applied immediately.
The individual setting preliminary display (1) will
appear again after you have run through all the setting
menus. Pressing the è or ÿ button displays the
next or previous system.
To return menu “LIGHTING” (3 to 6) to its factory
setting:
• Call up menu (3 to 6).
• Press the reset knob on the instrument cluster (see
page 88) in the instrument cluster for approximately
3 seconds. Display (7) will appear.
• Press the reset knob on the instrument cluster once
more. The menu “LIGHTING” is reset to factory
settings, acknowledged by display (8).
The individual setting display “SETTINGS” (2) will
appear if you do not press the reset knob on the
instrument cluster within about 5 seconds. The
setting menus will not be reset.