Filter
Top Products
257Driving systems
Technical
data
Instruments
and controls
Operation Driving
Instrument
cluster display
Practical hints Car care Index
• For a more precise setting the speed can be
increased in increments of 1 mph (Canada: 1 km/h)
by briefly pulling the control lever in direction (4).
Caution!
If the driver’s foot is not fully removed from the
accelerator pedal, the Distronic control system will be
overridden and it will not regulate the preset vehicle
speed and following distance. The vehicle speed and
following distance will be determined only by the
accelerator pedal position.
Invalid attempts to activate
The multifunction display will show “–––” during
invalid attempts to activate Distronic:
• below a speed of approx. 25 mph
(Canada: 30 km/h),
• while the electronic stability program (ESP) is
switched off – ESP warning lamp v in
speedometer dial is illuminated, see page 114,
• by moving the distronic control lever in “RESUME”
direction (4) when no speed is stored in memory,
• during the initialization and self-test phase after the
engine is started – this can take up to 2 minutes,
• while depressing the service brake pedal,
• while the parking brake is set – check ; warning
lamp (Canada: !) in instrument cluster, see
page 114,
• with the gear selector lever in position “P”, “R”
or “N” – check gear range indicator display in
instrument cluster, see page 114.
Warning!
Distronic brakes (up to 20% of vehicle braking
power) the vehicle to restore the preset distance or
to maintain the speed. The brake pedal is
automatically retracted as this happens.
Keep driver’s foot area clear at all times, including
the area under the brake pedal. Objects stored in
this area may impair pedal movement which could
interfere with the braking ability of the Distronic
system.
Do not place your foot under the brake pedal – your
foot could become caught.