Filter
Top Products
MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIES
Item Capacity
Mazda Part Name or
equivalent
Application
Brake fluid
Between MIN and MAX
lines on reservoir
High Performance DOT 3
Motor Vehicle Brake Fluid
Brake fluid reservoir
Engine coolant 7.4 quarts (7.0L)
Mazda Premium Engine
Coolant
1
Cooling systems
Motor/Electronics
(M/E) Coolant
3.7 quarts (3.5L)
Engine oil 5.0 quarts (4.73L) SAE 5W-20 Motor Oil Engine
Automatic eCVT
transmission fluid
5.3 quarts (5.0L)
2
MERCON VATF
3
Transmission
Rear axle fluid (4WD) 2.96 pints (1.4L)
4
API service GL-5
SAE 80W-90
5
Rear axle
Power Transfer Unit
fluid (4WD)
6
12 ounces (0.35L)
API service GL-5
SAE 75W-140 Synthetic
Lubricant
Power transfer unit
Windshield washer fluid 2.7 quarts (2.6L)
Ultra-clear Windshield
Washer Concentrate
Washer fluid reservoir
Fuel tank 15 gallons (56.8L) — All
1
Add the coolant type originally equipped in your vehicle. Refer to Adding engine coolant in this chapter.
2
Indicates only approximate dry-fill capacity.
3
Using any transmission fluid other than those that meet the recommended specification may cause
internal transaxle damage. Do not use MERCON CVT (blue) ATF. This vehicle uses only
MERCON V ATF.
4
Fill to 1/4 inch to 9/16 inch (6mm to 14mm) below bottom of fill hole.
5
4WD vehicles exposed for prolonged periods to temperatures less than -40° C (-40° F) should
change out the rear axle fluid to SAE 75W-140 axle lubricant.
6
The Power Transfer Unit is lubricated for life with synthetic lube. Lubricant levels are not to be
checked or changed unless a leak is suspected or repair required. Replace Power Transfer Unit
lubricant with specified synthetic lubricant anytime the unit is submerged in water.
2009 Tribute Hybrid (thv)
Owners Guide, 1st Printing
USA (fus)
Maintenance and Specifications
299