Filter
Top Products
Black plate (21,1)
qAutomatic Locking Mode
To enable seat belt automatic locking mode, pull it all the way out and connect it as
instructed on the child-restraint system. It will retract down to the child-restraint system
and stay locked on it. If the LATCH lower anchors are not used alone for LATCH styl e
junior seats and infant carriers without tethers, always use the automatic locking mode to
keep the child-restraint system from shifting to an unsafe position in the event of an
accident. See the section on child restraint (page 2-17).
Essential SafetyEquipment
Seat Belt Systems
2-9
MX-5_8Z78-EA-08K_Edition1 Page21
Thursday, October 23 2008 1:52 PM
Form No.8Z78-EA-08K