Filter
Top Products
®®
Revision 1.1 Page A3
Bit 6: Neutral Start Protect - The EMS100 always transmits a value of 0 for this
field.
Bit 7: Engine Shutting Down - The EMS100 always transmits a value of 0 for this
field.
Bit 8-15: These bits are reserved and should be masked when read
13: Percent Engine Load – (8-bit signed integer) This field indicates the percent load of
the engine in units of 1 percent. The EMS100 does not provide a value for this field.
14: Percent Engine Torque – (8-bit signed integer) This field indicates the percent torque
of the engine in units of 1 percent. The EMS100 does not provide a value for this
field.