Filter
Top Products
Based on the programming done at the time of installation, this function can operate in (5)
different ways. Press and hold the and button at the same time to activate the channel 4
output.
1. Channel 4 output will pulse 1 time for 1 second.
2. Channel 4 output will latch on. Turning on the ignition key will turn it off.
3. Channel 4 will have output as long as you are holding down the and buttons.
4. Channel 4 will have output for 15 seconds then turn off.
5. Channel 4 will have output for 30 seconds and turn off.
The security system has a unique feature for using your vehicle’s dome light:
1. Upon disarming the vehicles security system, the interior dome light will remain on for 30
seconds.
2. If the security system is triggered, the dome light will flash for the same duration as the
horn/siren.
Note: Turn “On” the ignition switch or arm the system to turn off the dome light.
If the vehicles door locks have been interfaced with the security system, the system will
automatically lock the doors when the ignition is turned “On”, or unlock the doors when ignition
key is turned “Off”.
Press and hold the button for two seconds to activate the trunk release (channel 3 output)
and/or any other devices connected.
If the “Out-of-Range Indication” feature is activated the system will automatically check the range
every 30 minutes after being armed.
1. If the user is within the range, the icon will appear on the LCD screen.
2. If user is out-of-range, the icon will disappear from the LCD screen and the transmitter will
beeps 5 times.
Note: Activating this feature will decrease the life expectancy of the battery.
Driver Paging / Lost and Found is useful the event that someone wants to page
the driver of the parked vehicle, or someone cannot find the LCD transmitter.
With the ignition switch in the “Off” position, press and hold the valet switch for
2 seconds to page the driver. One chirp shall be emitted and the paging melody
continues sounding from the LCD transmitter and will flash on the screen.
12
Security Operation
(continued)
Out-of-Range Indication (Optional, LCD Remote Only)
Driver Paging / Lost and Found (LCD Transmitter Only)
Timer Control Output (Channel 4) (Optional)
Trunk Release Output (Channel 3) (Optional)
Ignition Controlled Door Locks (Optional)
Dome Light Supervision (Optional)