Magnadyne M35 Automobile Electronics User Manual


 
Mirror/Monitor Features
3
1. 4.3” LCD Monitor
2. Rearview Camera Selection Button (CAM)
3. Power On Indication LED
4. Adjustment Button for Image Settings
5. Rearview Mirror Glass
1
2
4
5
CAM
3
General Operation
The mirror/monitor automatically activates every time the ignition key is turned “On”. The mir-
ror/monitor will turn Off when the ignition is turned to the “Off” position.
Rearview Camera:
• When a rearview camera has been installed, whenever the vehicle is shifted into reverse
gear the monitor will automatically display the camera image. The rear observation camera
image turns off automatically anytime the gear selector is moved out of the reverse position.
Pressing the CAM button will display the image from the rearview camera on the monitor. Press
the CAM button again and the image from the rearview camera will no longer be displayed.
Note: If the vehicle is put into reverse the rearview camera image will automatically be
displayed on the monitor.
LCD Monitor Settings Control
The monitor adjustment button is located on the bottom center of the rearview mirror. Move
the button up and down to choose the setting you want to adjust. Move the button to the
left and to the right to adjust the setting’s value. Press button to accept.
BRIGHT 10
CONTRAST 10
COLOR 10
HUE 4
BRIGHT 0-20
CONTRAST 0-20
COLOR 0-20
HUE 0-4
Adjustment Screen Settings Setting Adjustment Range