Filter
Top Products
Congratulations on your purchase of Silencer’s “Vehicle Contents Protection
Module”. The Silencer VCPM was designed to enhance your vehicle’s exist-
ing security system by providing protection for items inside the passenger’s
compartment of your vehicle. Typically, a factory installed security system is
designed to prevent the theft of the vehicle but it usually will not protect the
contents of the passenger’s compartment. With the addition of the Silencer
VCPM your vehicle is protected from theft and the items inside the vehicle
are also protected.
To operate your new Silencer Vehicle Contents Protection Module, follow
the instructions enclosed.
There are two (2) components of the
VCPM that you will need to know how
to use. The rest of the operation is automatic.
Daily Operation
1. The LED indicates to you and others that the VCPM is active and pro-
tecting the interior of your vehicle when it is flashing.
2. Every time you turn off the ignition of your vehicle, the LED will begin
to flash. When the ignition key is on, the LED is off .
Note: In some vehicles the LED and valet switch will be in separate locations while in other
vehicles, they will be located together in a housing at the bottom edge of the dashboard.
Valet Switch LED Indicator