Filter
Top Products
42
Product:
Map330,
Map330M
Question:
How do I clear memory in MAP 330 and in 330M?
Answer:
From any screen press the menu button, highlight setup, and press
enter. Highlight clear memory and press enter. Select the choice and
press enter. Confirm yes and press enter.
Clearing Track History
Clearing Wpts/Routes
Clearing all Routes
43
Product:
Map330,
Map330M
Question:
How can I clear all memory in MAP 330?
Answer:
From any screen press the menu button, highlight setup, and press
enter.
Highlight clear memory and press enter.
Highlight all and press enter...
Confirm yes and press enter.
Your GPS will turnoff.
44
Product:
Map330,
Map330M
Question:
How do I access the sun/moon screen?
Answer:
Press menu and highlight sun/moon and press enter.
46
Product:
Map330,
Map330M
Question:
What information can I get from the about screen?
Answer:
The ”about” screen displays the status of MAP 330 and MAP
330M.Using the about screen you can tell what the version of the
software is, the version and memory size of the base map, the
number of and total memory size of detailed maps you may have
installed using MapSend Street, and how much free memory is
available.
47
Product:
Map330,
Map330M
Question:
What is the difference between degrees/minutes/seconds
(DEG/MIN/SEC) and degrees/minutes/minutes (DEG/MIN/MMM or
DEG/MIN/MM)?
Answer:
There are different ways to express the coordinates computed using
latitude/longitude coordinate system. With DEG/MIN/SEC the final
set of numbers (SEC) is expressed as 0-59 while DEG/MIN/MM
expresses the same value as 0-99 and DEG/MIN/MMM is from 0-
999. It would be the same as if you had one clock that expressed
time as hour/minutes/seconds and another clock that expressed the
same time as hours/minutes/decimals. The accuracy for any of the
three is the same.
48
Product:
Map330,
Map330M
Question:
When the time changes for daylight savings will the time in your GPS
change automatically?
Answer:
No. The time transmitted by the satellites atomic clock is UTC
(Universal Time Coordinated) and provides no correction for daylight
savings. When daylight savings time changes (or when you move to
a new time zone), you need to go into setup —time format and re-
select the time format you are using unless you are using UTC. After
selecting the format you will be given the opportunity to change the
time.
49
Product: Question:
What waypoints come preloaded on my MAP 330database?