Filter
Top Products
To Navigate to a Point of Interest on the Chart page:
From the Chart page, center the 1.
cursor over a point of interest.
Press the MENU key. The Chart
menu will appear.
From the Chart menu select 2. Go
to Cursor, press ENTER. The unit
will begin navigating to the cursor
position on the Chart page.
To stop Navigating to a Point of Interest or any other destination:
From the Chart menu select 1. Navigation and press ENTER.
Highlight and select 2. Cancel from the submenu. To reset your
cross-track (of course) error, select Restart Navigation from the
submenu.
Go To Cursor / Cancel Navigation
To Create Waypoint at current position:
Press the 1. WPT/Find key to create a waypoint at the your current
position.
To Create Waypoint at the Cursor position on Chart page:
Place the cursor on the Chart 1.
page where you want to set the
waypoint, press the ENTER key.
The New Waypoint menu will
appear.
Select 2. Save from the New
Waypoint menu.
Waypoints screen
To view stored waypoints go to the
Waypoints screen in the Utilities page. From
the Waypoints screen you can view and edit
stored waypoints.
Waypoints