Filter
Top Products
85
want to experiment with Position Pinning, the same instructions are
used to turn the feature on (checked) and off (unchecked.)
1. Press
MENU
|
MENU
|↓ to
GPS S
ETUP
|
ENT
|↓ to
P
OSITION
P
INNING
|
ENT
.
2. Press
EXIT
|
EXIT
to return to the previous page.
Reset Options
To reset all features to their factory defaults:
Press
MENU
|
MENU
|↓ to
S
YSTEM
S
ETUP
|
ENT
|↓ to
R
ESET
O
PTIONS
|
ENT
|← to
Y
ES
|
ENT
.
NOTE:
Reset Options does not erase any waypoints, routes, icons, plot trails or
sonar logs.
Reset Options command, left, and the Reset Options Menu, right.
Require DGPS
You can force the GlobalMap to require DGPS for reporting a valid po-
sition. (The default setting, off, uses DGPS automatically when an op-
tional DGPS beacon receiver is connected. However, this auto mode
doesn't require DGPS reception to yield a position.) Here's how to turn
mandatory DGPS on and off.
1. Press
MENU
|
MENU
|↓ to
GPS S
ETUP
|
ENT
|↓ to
R
EQUIRE
DGPS
|
ENT
.
2. To return to the last page displayed, press
EXIT
|
EXIT
.
3. You can return to this command and press
ENT
again to turn the fea-
ture off.