Filter
Top Products
6 |
HDS Gen2 Touch overview | HDS Gen2 Touch Installation Manual
HDS Gen2 Touch overview
The HDS-7, HDS-9, and HDS-12 Gen2 Touch multifunction displays
are available with or without inbuilt sonar and structure scan. The
ability to network over NMEA 2000 and ethernet allows access
to data as well as control of numerous optional devices that can
provide sonar, radar, audio entertainment, weather and even digital
switching.
All displays are charting ready, with built-in GPS receiver and Insight
cartography (region dependent) and with optional Navionics
support via an SD card slot.
The displays may be mounted on to the vessel with the supplied
surface mount bracket, or ush mounted in to the dash.
Power should be supplied at around 12V, but due to the variable
nature of boat power systems, the displays are designed to operate
on 10.8 V - 17 V.
1