Filter
Top Products
Replacing headlamp bulbs
To remove the headlamp bulb:
1. Make sure the headlamp switch is in the off position, then open the
hood.
2. Remove the three retainers on top of the radiator cover and the two
retainers in front of the radiator cover.
3. Remove the three bolts for each headlamp.
4. Press the retainer next to the vertical aim adjuster, then pull the
headlamp assembly forward and disconnect the electrical connector.
5. Remove the five screws and the protective bulb cover from the
headlamp assembly.
Low beam
• Disconnect the electrical
connector and remove the
retainer.
• Remove the bulb by turning it
counterclockwise, then pull it
straight out.
High beam
• Disconnect the electrical
connector from the bulb.
• Remove the bulb by turning it
counterclockwise, then pull it
straight out.
WARNING: Handle a halogen headlamp bulb carefully and keep
out of children’s reach. Grasp the bulb only by its plastic base
and do not touch the glass. The oil from your hand could cause the
bulb to break the next time the headlamps are operated.
6. To complete installation, follow the removal procedure in reverse
order.
Lights
49
2011 Town Car (tow)
Owners Guide, 1st Printing
USA (fus)