Filter
Top Products
6. Disconnect the electrical
connector from the bulb.
7. Connect the electrical connector
on the new bulb.
WARNING: Handle a halogen headlamp bulb carefully and keep
out of children’s reach. Grasp the bulb only by its plastic base
and do not touch the glass. The oil from your hand could cause the
bulb to break the next time the headlamps are operated.
8. Insert the glass end of the new bulb into the headlamp assembly.
When the groves in the plastic base are aligned, turn the new bulb
clockwise to install.
9. Install the bulb cover.
Replacing front parking lamp/turn signal bulbs
1. Make sure that the headlamp
control is in the off position.
2. Open the hood.
3. Reach over the front bolster.
4. Remove the bulb cover.
5. Rotate the bulb socket
counterclockwise and remove from
the lamp assembly.
6. Carefully pull the bulb our of the
socket and push in the new bulb.
7. Install the bulb socket in the lamp
assembly and rotate clockwise.
8. Install the bulb cover. Note: The
driver side has a side access bulb
cover instead of a back access bulb
cover.
Lights
53
2010 MKX (mkx)
Owners Guide, 3rd Printing
USA (fus)