Filter
Top Products
Item Capacity Ford part name
Ford part number / Ford
specification
Windshield washer
fluid
Fill to line on
reservoir
Motorcraft Premium
Windshield Washer
Concentrate
ZC-32-A /
WSB-M8B16-A2
Fuel tank
19.0 gallons
(71.9L)
——
1
Use only brake fluids certified to meet Ford specifications.
2
Add the coolant type originally equipped in your vehicle.
3
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the
requirements of Ford specification WSS-M2C930-A and the API Certification mark.
4
Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and
if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set
by the indication on the dipstick’s normal operating range.
5
Automatic transmissions that require MERCON V should only use MERCON V fluid. Refer to
scheduled maintenance information to determine the correct service interval. Use of any fluid
other than the recommended fluid may cause transmission damage.
6
Add 4.0 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification
EST-M2C118-A for complete refill of Traction-Lok rear axles only.
7
Service refill capacities are determined by filling the rear axle 1/4 inch to 1/2 inch (6 mm to 13
mm) below the bottom of the filler hole.
8
Rear axles are considered lubricated for life when the vehicle is used for normal service. For
severe duty requirements, see Exceptions and Special Operating Conditions in scheduled
maintenance information.
2008 Town Car (tow)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
257