Filter
Top Products
Installing shade
1. Position shade in mounting
brackets as shown (tongue faces
rear of vehicle).
2. Pull end of shade towards you
and hook sides into notches in rear
trim panels.
To avoid possible injury
during a sudden stop or
collision, the cover should be
attached to the brackets when
not in use.
Rewinding shade to regain lost
tension
Over time, the cargo shade may
lose its spring tension. If this
happens, then follow these
instructions to rewind the shade.
You will need the help of another
person.
1. Remove the shade from the side
anchor slots by compressing
telescoping tube. Extend the shade
fully. Make sure smooth grain is
facing you.
2. Wrap the vinyl around the roller
tube twice. Tuck the edges of the
vinyl inside the end cap with each
wrap.
Controls and features
47