Life Fitness TR9100 GPS Receiver User Manual


  Open as PDF
of 4
 
Life Fitness Model 97Ti, 95Ti, 93T Treadmills
How To...Replace or Install Rear Roller Guards (Continued)
4. Place new Roller Guard in position shown with top surface under walking belt. Align mounting holes.
5. Install Screws and fasten securely. Approx. 22-37 in/lbs.
6. Repeat steps for opposite side. After completion run treadmill and check for interference or binding. If
needed loosen Mounting Screws, re-align Guard, and refasten securely.
Roller Guard to be
located between bel
t
and deck
Align mounting holes
with grommet holes
Secure Mounting
Screws
M051-00K58-A128
 previous