Open as PDF
Remove contents from box. Remove the foam separators that protect the components from damage during
shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have
occurred during shipping. Because the Pocket Rocket was 95 percent assembled and packed at the factory,
there should not be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 30 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge (see page 3 for charging information).
BEFORE YOU BEGIN
Do not use your Pocket Rocket
for the ﬁ rst time until you have
charged the battery for at least
12 hours. Failure to do so may
damage your vehicle and void
DO NOT USE
PRODUCTS WITH YOUR RAZOR
. The Pocket
POCKET ROCKET. The Pocket POCKET ROCKET
Rocket has been built to certain
Razor design speciﬁ cations. The
original equipment supplied at
the time of sale was selected
on the basis of its compatibility
with the frame, fork and all
other parts. Certain aftermarket
products may or may not be
Some tools may be supplied; however, we recommend the use of mechanic’s grade tools. Use the supplied
tools only as a last resort.
our web site
for updates and a list of authorized service centers
Monday - Friday 8:00 AM -
4mm and 5mm
Bicycle-style tire pump for
Schrader valve tires, with