LG Electronics PR200 Motorcycle User Manual


 
Sometimes the vehicle
doesn’t run, but other
times it does
Charger gets warm
during use
Vehicle does not stop
when applying the brake
Vehicle makes loud
noises or grinding
sounds
Need Help?
V
isit
our web site
for updates and a list of authorized service centers
at
www.razor.com
or
call
t
oll-free
at
866-467-2967
Monday - Friday 8:00 AM -
5
:00
PM
Pacifi c
T
ime.
Problem Possible Cause
Solution
Loose wires or connectors
Motor or electrical switch damage
Normal response to charger use
Brake is not adjusted properly
Chain is too dry
Check all wires around the motors and all connectors to make sure
they are tight.
Contact your local Razor authorized service center for diagnosis and
repair.
No action required. This is normal for some chargers and is no cause
for concern. If your charger does not get warm during use, it does not
mean that it is not working properly.
Refer to instructions on page 4 of this manual to properly adjust
brake.
Apply a lubricant such as 3 in 1
TM
or Tri-Flow
TM
to the chain.
TROUBLESHOOTING GUIDE
8