Filter
Top Products
3
06/25/07
Manual No. 701-154M
Assembly Instructions
Land Pride
■
5. The hitch comes already assembled. Mount the Hitch
(#1) in the manner that will position the trailer pin hole at
11 inches or more from the ground.
Note: On most machines the hitch will be mounted as
shown above.
6. Make sure the Hitch (#1) is straight in line with the
center of the Machine. First tighten the 3/4" x 2" Bolt
(#14) just enough to take out the free play. Then tighten
the 5/16" Eyebolt (#9) until it actually begins to draw the
Hitch (#1) into the Rear Reese Hitch (701-017A). Tighten
the Eyebolt (#9) an additional turn and then FULLY
tighten the 3/4" x 2" Bolt (#14).
7. Connect the Trailer to the Hitch Assembly using the
remaining 3/8" x 2- 1/2" Lock Pin (#8) as shown in the
picture above.