Filter
Top Products
2
Manual No. 356-140M 2/28/05
Land Pride
Assembly Instructions
■
Refer to Figure 3:
6. Place control lever in neutral position.
7. Loosen the steering dampeners front ball stud (A).
8. Pull dampener spring housing (B) pass the point that
the internal spring is engaged.
9. Release dampener spring housing (B) and allow the
internal spring to bring the housing back to the
neutral position.
10. Tighten nut (C) on the steering dampeners front ball
stud (A).
11. Re-connect the negative battery cable.
Figure 3
NOTE: The dampener must not bottom out when the
pump lever is fully stroked in either direction.
22457
A - Steering dampener front ball stud
B - Dampener spring housing
C - Nut