Filter
Top Products
5
8118/8124TK 006020 R082103
KUHN KNIGHT INC.
1501 West 7th Ave. Brodhead, WI 53520-0167
701 Cherry Ave. Greeley, Co. 80632
FRONT DRIVE PARTS
REF PART NO QTY DESCRIPTION
1 170-008 2 Bearing, 2" Roller; Mtg Hrd: 5/8" x 1-3/4" Bolt, LW, Nut (4 ea)
2 133-476 1 Sprocket; 60-B-55 x 2" Bore, Inc. 170-249 set screw
3 134-842 1 Counter Shaft; 2" x 12 1/2”
4 170-835 2 Key; 1/2" Sq. x 1-1/2"
5 135-551 1 Sprocket; 80-B-15 x 2" Bore, Inc. 170151 set screw
6 102-212 1 Bearing Assy 2”; Mtg Hrd: 5/8" x 1 1/4" Bolt (4 ea), FW (8 ea), LN (4ea)
7 135-614 1 Bushing, straight; 3” ID x 2 1/2" O.D.
8 135-540 1 Bearing Standoff Bar
9 170-053 2 Bearing, 2 1/2" Roller; Mtg Hrd: 5/8" x 2 1/2" Bolt (front brg.)
5/8" x 1-3/4" Bolt, (rear brg.) LW, Nut (4 ea)
10 133-530 1 Counter Shaft; 2-1/2" x 12 3/4"
11 171-769 1 Key; 5/8" Sq. x 4-3/8"
12 130-175 1 Sprocket; 120-B-12 x 2 1/2" Bore, Inc. 170-249 set screw
13 135-541 1 Sprocket; 80-B-42 x 2 1/2" Bore, Inc. 170-249 set screw
14 172-288 2 Bearing, Flanged, 1 1/2” ID; Mtg Hrd: 1/2" x 1 3/4" Bolt, LW, Nut (4ea)
15 134-786 1 Sprocket; 60-B-21 x 1 1/2" Bore
16 172-894 1 Key, 3/8” x 3/8” x 2 3/8”
17 134-918 1 Input Shaft; 1 1/2" x 17”
18 134-602 1 Sprocket; 60-B-18 x 1 1/2" Bore
19 172-287 1 Shaft Collar, 1 1/2” ID
20 134-907 1 Chain Guide, 3” OD x 2 1/2”
21 134-906 1 Seal Retainer
22 172-355 1 Seal, Lip, 1 1/2” ID
23 171-607 1 Snap Ring; 3 1/2"
24 134-792 1 Sprocket; 120-B-48 x 3-1/2" Bore
25 136-286 1 Nylon Thrust Washer 1/8” x 3 1/2” ID
26 172-874 1 Quadring Seal
27 102-215 1 Bearing Housing; Mtg Hrd:5/8" x 1 1/4" Bolt, FW, Nut (4 ea)
28 135-613 1 Bushing, Straight; 3 1/2” I.D. x 4 1/4" O.D.
29 135-598 2 Thrust Washer
30 170-865 1* Grease Zerk 1/8” NPT
31 172-024 1* Coupling
32 170-244 1* Flat Washer 3/8"
33 172-822 2* Compression Fitting
34 180-630** Grease Line Tubing
21" Required for rear upper counter shaft bearing
9" Required for rear lower counter shaft bearing
25" Required for left front auger bearing
12 " Required for right front auger bearing
12" Required for front upper counter shaft bearing
19" Required for front lower counter shaft bearing
37" Required for front input shaft bearing
50" Required for rear input shaft bearing
19" Required for front hammer shaft bearing
35 172-823*** 1* Adapter Fitting
36 171-935 10’** Gasket; Foam Seal
37 104-038 1 Shield; Front Oil Enclosure
38 173-027 2 Lift and Turn latch
39 134-908 1 Cover Plate; Mtg Hrd: (4) 1/2” x 1” Bolt, Lw, Nut
* Quantity required to complete 1 grease line assy
** Sold by the linear foot.
*** Not required on all installations.