KTM 990 ADVENTURE S Motorcycle User Manual


 
TECHNICAL SPECIFICATIONS – ENGINE »
ENGINE 990 LC8
Mixture preparation EFI (electronic fuel injection)
Ignition system breakerless transistorized electronic ignition system with digital ignition advance
Ignition timing Map-controlled via TPS
Generator 12V 450W at 6000 rpm
Spark plug NGK DCPR 8 E
Electrode distance 0.8 mm
Cooling system liquid cooled, permanent circulation of cooling liquid through water pump
Cooling liquid 2.1 liters, 50% antifreeze, 50% distilled water, at least –25° C
Starting aid 0.9 kW electric starter
10W/50
5W/40
JASO T903 MA
TEMPERATURE
0°C
32°F
Engine oil
Only use fully synthetic engine oils that meet the JASO MA quality requirements (see infor-
mation on the can).
KTM recommends Motorex Power Synt 4T in the 10W/50 viscosity (for temperatures over
0°C, 32°F) or 5W/40 (for temperatures under 0°C, 32°F).
#
PON / CLC RON / ROZ MON
87 91 83
91 Premium 95 87
PON = Pump Octane Number
CLC = Cost of Living Council
RON = Research Octane Number
ROZ = Research Oktan Zahl
MON = Motor Octane Number
*
95